SwissStop Disc 31 – Organic Brake Pads for SRAM Guide

Excellent modulation and wear life characterize the SwissStop Disc 31 brake pads.

The Swissstop Disc 31 brake pads feature high performance Kevlar, Ceramic, Brass and resin composite material in their construction, providing excellent brake power with minimal effort at the brake lever.

Performance is consistent in both wet and dry conditions and pad life is excellent. High quality springs included with every set (where applicable).

Swissstop Disc 31 brake pads fit the following brake systems:

Avid – XO Trail; Elixir 9 Trail; Elixir 7 Trail

SRAM – Guide Ultimate; Guide RSC; Guide RS; Guide R

Attention: pads must be bedded in to achieve optimal performance

Step 1. On a gradual downhill slope, drag each brake for 20-30 seconds, alternating between front and rear. Repeat 2-3 times.

Step 2. On a steeper slope, engage and drag the brakes for 10-15 seconds then increase lever pressure until the bike slows almost to a complete stop. Repeat 2-3 times.

Pro tip: the front pads will have been heated more than the rear. To achieve optimal performance, exchange the front and rear pads then repeat step 2.

Caution before replacing or exchanging brake pads it is essential to let all parts cool.